TRANSCRIBED AND TRANSLATED MEDIA Militarnyi

Visa filmarkiv

“The target must disintegrate in the air” – SPYS drone against jet targets!

Voidrons is developing the Spis, an interceptor drone designed to counter jet-powered targets with speeds exceeding 450 km/h and a range of 45 kilometers.


Speaker 1

Hello everyone! You are watching "Militarnyi do zbroyi" and today my guest is a representative of the company "Voidrons." Welcome!

Speaker 2

Greetings.

Speaker 1

And today we will be talking about the Sпис and about the company in general. I have known you for a long time, I have been following you for a long time. Today I was recalling when I first noticed the products. It was the "Day Brave" demo. And the theme there then was, it seems to me, "Small Bombers". And you showed the Strila then. That was probably about two years ago. Something like that. But at the "Days of Technological Forces of Ukraine" demo in July of this year, you showed the Sпис. An interceptor drone that, in terms of speed, can shoot down jet drones. And when we spoke, it was a new drone. And you said that literally a week after this event, the drone would go for trials with the military. Did the trials take place?

Speaker 2

That is exactly how it is. You said everything correctly. Actually, I would like to start with a short backstory. Before that summer interview, when we showed the spear together with you, we actually started in the spring. But when we started, we didn't understand these boundaries. Our task was, let's push through as quickly as possible.

Speaker 1

this

Speaker 2

drone and let's see what speed we are capable of reaching. For some time we did this, but we were greatly helped by the framework set by the commander, who together with the relevant departments of the Ministry of Defense started the process at the iron polygon, at BREV-1. And this gave us a bit of a framework within which we should develop. Because when we started, it looked like we had a high maximum speed, but no range. Or we make a large range, but there is no maximum speed. And we were essentially working between these extremes. And the official commander, they gathered, consolidated all the information on these jet Shaheds and presented it to the manufacturers and said, look, we have these desired technical specifications, develop a product that fits into this framework and, accordingly, we will continue to develop this with you.

Speaker 1

Just to clarify, when exactly was this?

Speaker 2

Essentially, this started at the beginning of summer. At the beginning of summer, we already had some kind of framework within which we could develop and refine such an application, because there had already been such substantial substantive work on development. And we acted precisely within those limits that the Ministry of Defense had designated for us in the relevant documents, tests, and so on.

Speaker 1

I'd like to ask a bit more about this then, because it's interesting. In other words, were you given specific parameters that the drone must meet, or were you given a range from X to Y? Speed from X to Y, flight range from X to Y. What does that look like?

Speaker 2

It looked something like this. This was given not only to us. Everyone was gathered.

Speaker 1

manufacturers,

Speaker 2

…who had done something similar. And they said that these are our requirements. If your drone meets the technical specifications, then we can say that this drone is capable of catching up with jet targets. Accordingly, we took this as a to-do and began executing it. First, we tried to meet one specification, then the second, third, fourth, and it progressed that way. But, in reality, it was such a push because, first of all, the Ministry of Defense consolidated this information. They made it publicly available so that manufacturers could adapt to it. And there was no process where everyone works something out for themselves or finds out from someone. This was consolidated information, very specific, and the same for everyone.

Speaker 1

How close or far were you from the parameters you received when you were already working on the drone?

Speaker 2

Actually, we started by achieving a speed of 600, but it was funny in the sense that the drone could fly 600, but at the same time, its minimum speed was 200. It turns out you have a drone that flies very fast, but it's a super unusable situation; you can't land it. You can take off and fly, but you can't land it. And constantly during the development of this product, such challenges arose that we had to fight, but, in fact, the base we had was sufficient to form this product. Our task, after we began working with the relevant departments at the iron proving ground with the Brave-1, we crystallized this prototype, with which, in essence, we went for combat testing. Now I want to demonstrate the updated spear to you.

Speaker 1

Let's first talk a bit more about the TS, of that original product, meaning a speed of 600 kilometers per hour. 12 minutes was the operating time, as far as I remember.

Speaker 2

Not exactly. 600 kilometers were our earlier prototypes, which didn't know how to land. The prototype that we started taking for combat testing had a declared maximum speed of 450 in its tactical and technical characteristics, but it had an adequate range, which is 33 kilometers, and the ability to land. But the prototype had these tactical and technical characteristics, but they had to be combined with real combat application experience. And that was our work together with combat units – to verify all of this. Speaking of the prototype, the tactical and technical characteristics were as follows. A maximum speed of 450 kilometers per hour, but we understand that there is always a reserve. 450 is what you can do at minimum under any

Speaker 1

weather

Speaker 2

conditions. In fact, in our tests at the Zaliznyy proving ground, the range reaches 500, but 450 is declared. 33 kilometers of range, 12 minutes in the air, and a warhead of 300. These are the main tactical and technical characteristics. If compared with its evolutionary continuation, actually this spis is already the version that has incorporated all those changes that the military asked of us. Since there was combat work, they asked to change this, rework that, add something here, subtract something there. And now, in fact, we have this sample. The key difference is aerodynamics. And from aerodynamics, actually, all the other changes in the tactical and technical characteristics follow. Because it was aerodynamics that gave us the ability to fly longer, faster, and certain other changes in characteristics that were influenced by aerodynamics. If speaking comprehensively about all tactical and technical characteristics, it is worth starting with the warhead. In this sample, the warhead was 300 grams, but we did not yet have a codified warhead. And accordingly, we faced the fact that we could not control the quality of the warhead, because this work was on the side of the combat crews. And so, everything regarding the warhead, we could not influence it in any way—its quality, its predictability, its repeatability. In the new sample, first, we increased the possible weight of the warhead to 500 grams, and second, we codified the standard factory warhead, which is provided and has greater destructive capabilities, because it is a factory product, standard, according to all technical specifications, complying with all relevant rules. Plus, it is also safer for the crews, because it is safe storage, it is a detonator, it is a warhead—it is all a factory story with its own certificates and necessary relevant documents. Further, continuing the account of the differences, it should be noted that this sample already has a range of 45 kilometers versus 33.

Speaker 1

This

Speaker 2

such a significant increase, it more stably demonstrates the ability to fly over 450. I will not specify the maximum speed right now because certain tactical and technical characteristics could be a basis for countering these assets, so I will simply say it is over 450. Also, one of the important parts is the added automatic control functions for this drone. The first is automatic takeoff, the second is automatic entry into the target area. If you are integrated with a radar system, you effectively have two modes. The first mode, like in a computer game, is when arrows show you to fly up-up, turn straight, and so on. The second mode is that you can hand over control to it; it will fly on its own not in the direction of the Shahed, but toward a prediction point, taking into account the speed of the Shahed and yours, where you will meet. Accordingly, it will fly to the point where the Shahed is potentially supposed to be, and it will do so taking into account their speed, direction, trajectory of movement, and so on.

Speaker 1

How is this point of probable convergence calculated? What software is this? Is it one that is commonly used, or is it your internal software?

Speaker 2

This is our internal software. Radar systems and the general SkyMap system, which is a data source for us, are commonly used. We take data on speed, trajectory of movement, direction vectors, and so on. Then we process this data and calculate the predicted intercept point. It can change along the route, but conditionally, when you are leading and you are 20, 10, 5, 3 kilometers from this point, you don't notice it; it flies on its own and simply corrects this point along the way, because actually, what separates us from full automation—where you can operate it entirely without a person—is that the radar does not always provide accurate data, of sufficient precision, and you cannot rely on its data in terms of the fact that when the radar says there is a Shahed here, you might arrive, but it won't be there; it could be to the right, left, up, down, and you still have to look for it visually. This is quite complex work. Sometimes when you watch the videos produced by our pilots, it's simply fantastic work; I don't know what kind of eyes they have, it takes such experience to simply spot those pixels changing color in space that you just wonder how they saw it. And this is one of the differences: when our pilots come and fly, no matter how much they think they fly great, but combat pilots—well, it's just fantastic—they sometimes notice things in the sky that you don't understand how they even do; they are at such a high level that this is precisely the advantage of working with combat pilots, because you learn from them, and they can give you tips and develop a joint workflow to counter some threat. Therefore, these automation systems were added here, and they are intended to slightly simplify the work for the pilots because there is a very high cognitive load. We have seen records in Ukraine where people destroyed 20, 30, 40 Shaheds a day. These people are actually heroes; it's very hard to endure this. One must understand that they very often fly at night, they may fly in bad weather, and that is such a cognitive load. This is really hard to endure.

Speaker 1

That is, the system allows it to fly to the probable location where the Shahed will be. Then a person guides it further. How does this work at such speeds? And there are also acquisition-detection systems. Tell us more about this aspect.

Speaker 2

Acquisition-detection – you are talking about the terminal guidance system, where you don't orient based on radar data, but rather on the image from a thermal camera and the thermal signature of the target. This is a terminal guidance system, sometimes called pixel locks. We are also working on this; this system is present in this drone. Currently, since Shaheds are increasing their speed, head-on interception has become a very relevant topic, where you don't chase the target, but fly to intercept it. Accordingly, we are also working on this system. We are developing the drone in such a way that once this system becomes operational, we will be able to update the software, and it will be capable of doing this. But this is a fairly complex matter, primarily related to the fact that more expensive cameras and components are needed because speeds are increasing significantly. Because if we are talking about pursuit interception—we will provide you with a video where it is important to see—although their speeds are high, over 400 kilometers per hour, the closing speed is not so catastrophic. That is, the closing speed between the pilot and the Shahed may be 50 kilometers.

Speaker 1

Because the Shahed is also moving, or the Geran 5 is also moving. Yes,

Speaker 2

and for the pilot it may look like the interception of a regular MTO, an ICE Shahed, and there is no such anomaly here. But indeed the speeds are impressive, this is such a serious engineering challenge.

Speaker 1

So this system, which can lock onto a target on a head-on course, doesn't exist yet?

Speaker 2

We are working at the bottom, it's not here, we are not announcing it yet, but this is what is in progress.

Speaker 1

Can you explain the complexity of developing such a system? For understanding, what one has to work on, what is missing, or is the visual information itself insufficient in this oncoming target? How to process this?

Speaker 2

It should be understood that here we are essentially entering the realm of almost rocket speeds, because the Gran-5 is in fact a kind of rocket in all its characteristics—size, speed, and so on—the caliber is not that far from that Gran-5. And we simply run into the fact that the drone does not have sufficiently accurate data to rely on; you have a camera with a certain limitation on frames per second, and at such speeds, you need to see the object, evaluate its movement trajectory, speed, direction, and where it is moving. This is where complex mathematical models begin; this is where science begins, where you have physics and mathematics, and you approach it from the perspective of, "let's work with the code to create some approximation algorithms on which this will work." This is where truly scientific expertise in physics and mathematics begins in order to calculate these movement trajectories, make predictions, proportional navigation, and so on. This is simply a task of a slightly different order. Indeed, it is a complex task. Everyone who works on this knows how difficult it is.

Speaker 1

Pilots can perform interceptions on a head-on course with your system, with this drone. They are already implementing them; how is this done?

Speaker 2

And currently, we are not claiming that there is interception on the oncoming path. For a human, this is a very difficult task. We haven't seen anyone physically do this by hand yet. Therefore, we are working on it, but we are not claiming it. Right now, we are not saying that it is ready or that it can be used. This is simply work that we have.

Speaker 1

But such a goal exists. Of course, the goal

Speaker 2

That is how it is, because everyone understands that the speeds of the Gerans will increase. We see some targets, some of which already fly at over 700 kilometers per hour; this is possibly already the fifth Geran, but we see…

Speaker 1

Bandero-packages, DANT, the Russians showed this Filin missile not so long ago. Meaning, the path of development is understood, where this is heading further.

Speaker 2

One hundred percent. Plus, it is necessary to understand that if you have a guidance head capable of calculating such things, then further development, further evolution, it might not be a drone at all.

Speaker 1

A completely different system. Completely.

Speaker 2

Another system, yes. We are working on this, we are developing it. But now tactics, technical characteristics are improved. Some basic characteristics are improved. The combat part in terms of its destructive power and predictability. Therefore, we can now talk about such

Speaker 1

improvements. You also mentioned aerodynamics. Can you elaborate on what exactly changed? Because visually, they look similar. Like, you wouldn't say that this one is a bit flattened and this one is rounder.

Speaker 2

Yes, it actually is. They look quite similar, but…

Speaker 1

This size is slightly larger.

Speaker 2

It seems that way, but actually the aerodynamic drag efficiency of this drone is lower. If they didn't look similar, but here the wings are slightly not as wide. A different front part, the air intake is organized slightly differently, but…

Speaker 1

Antenna.

Speaker 2

The antenna, by the way, also created very high resistances in the antenna.

Speaker 1

Tell us about the component base. When you were talking about the Spear, you said that the development of the component base manufactured in Ukraine allowed for the creation of such a drone in the updated Spear. At the time, you spoke about special motors that MotorG developed to make such speeds possible. Electronics that can withstand such loads accordingly, currents, and so on. What is inside here?

Speaker 2

Yes, in fact, electronics is one of those key factors, because the largest part of the work was probably carried out specifically with the electronics. The main electronics are everything related to the power section. I won't go into great detail about what changes were made, but it was indeed reinforced. Speaking of the replacement of the electronics, it gave us more stability. These improvements provided more stability, more predictability at high speeds. Because in the prototype, we had fewer opportunities for reuse, since the electronics were operating on the limit, and we could not claim

Speaker 1

on

Speaker 2

some reusability. It was very difficult to ensure that you flew; if you failed to find a target in the sky, you returned, recharged the battery, and flew again. Here, the updated version is much better in terms of reusability.

Speaker 1

And what about the localization of the component base?

Speaker 2

Actually, the localization of the component base in this drone is quite high – it is about 70-80%. We are also actively working with our European partners, with Quantum Systems, because some things on this drone require inventing something new, for example, with batteries. The kind of batteries that you couldn't buy in Ukraine.

Speaker 1

with

Speaker 2

free market, some things you actually order from a factory according to your technical specifications, so that they design them for you, and you don't always have that option.

Speaker 1

It's about capacity and stability, as I understand it.

Speaker 2

This is such a multi-faceted issue. Capacity, stability, the ability to deliver a certain power, while not burning out, and so on. It is a complex issue, but there is also gratitude here to the European Union and to those companies in the European Union that can do this, develop it jointly with us, and that they have such a desire to help us and cooperate with us. About

Speaker 1

We will talk about Quantum, obviously, a bit later. Also Ukrainian motors.

Speaker 2

Specifically on this sample, these are not Ukrainian motors, these are Chinese motors, but actually we are experimenting, we are simply trying for ourselves to have at least three manufacturers to protect ourselves from the impossibility of producing this at any one single manufacturer. They are actually more or less similar, but you just have to constantly have

Speaker 1

how

Speaker 2

At least three alternatives, so that if something happens—you know, we are in a state of war, someone might be lost, something can be manufactured—you have to quickly reorient.

Speaker 1

These are primarily logistical issues. Yes,

Speaker 2

This is a matter of security; if we guarantee that the goods will be delivered on time, accordingly, we must be prepared for various scenarios that may occur.

Speaker 1

And the camera?

Speaker 2

The camera, by the way, is Ukrainian. I think you know this company.

Speaker 1

Well, there aren't that many companies in Ukraine that make such cameras. Not so

Speaker 2

many,

Speaker 1

Yes. The question is not obvious, but why are they white? You just told me at the TSU that there is a reason why they are white?

Speaker 2

They are not white for no reason. Actually, it is also a quite interesting story, because when we tested them in a heat and humidity chamber for climatic tests, you test minus 20, plus 50, and everything was perfect with them. They were black, everything was great. But when black drones lie in the sun in summer, we noticed that the plastic can heat up to 80%. Accordingly, everything inside is heated to 80 degrees, the housing is 80 degrees, and this was unexpected, because your air temperature can be 38-40, but in reality, a black drone lying in the sun can heat up to 80. This is the one and only reason why we changed the plastic, because a lot of attention is paid to heat dissipation here, and you simply cannot let it heat up in the sun and increase its temperature, because you are struggling with this temperature. Therefore, the decision was made to switch to white plastic to reduce the heat load inside this system as much as possible.

Speaker 1

It is not this color for no reason, it has a certain purpose in its application. Yes, in

Speaker 2

There is a practical side to this.

Speaker 1

Are they 3D-printed? Because they are in development, or is that just how it is and will be?

Speaker 2

It is necessary to understand,

Unknown speaker

what

Speaker 2

We are constantly testing and fighting the enemy, also in the engineering dimension, and we constantly need to change the product, and we cannot afford to freeze it at any stage, because as soon as you freeze the technology, the enemy comes up with how to improve their sword, while you still cannot make changes. Accordingly, 3D printing provides the opportunities to iterate; if there is some change initiated by the enemy's measures, you can implement it faster than it would have been possible if you had 3D thermoplastics, automatic machines, molds, and so on. These are the main changes. Also, I would like to separately mention that in October we had the first video where we were catching up to jet targets, and when we began to operate in combat, some results began to appear, the first visual contacts, the first interceptions of jet targets; we were supported by the president and the government of Germany, there was a visit by representatives of Ukraine and representatives of the German government, this is how we demonstrated this measure, and the support of the Ukrainian and German governments was secured.

Speaker 1

It mentioned then the procurement of several tens of thousands of interceptors. Is it specifically about the spear? In the photo, Merc is standing with a spear in [their] hands. Is it just a generalization in the figures, or is it only about your drones?

Speaker 2

If we're talking about that news, yes, it was news regarding write-offs,

Unknown speaker

but

Speaker 2

I think work is underway here, and we are working on it, so that there might be an option for such supply.

Speaker 1

Okay, we will talk about production separately. I wanted to ask regarding automatic launch, meaning that it takes off automatically, but there are also solutions with special launch containers that can be installed in various areas of the territory. In principle, in Ukraine, this could be both in the rear and at the front, because there is a threat of jet drones everywhere. Do you have such solutions? It seems to me that there is such a solution with the Strilela. Is this system also relevant for the Spis? Well, okay.

Speaker 2

Seriously? Will have to get up here too. Just sort of,

Speaker 1

under

Speaker 2

Interview time.

Speaker 1

We can say quite plainly that, look, they just shot down a Geran 5 while we were recording, and immediately everyone's mood lifted, I saw it.

Speaker 2

Actually, you don't consider how such a process is, how it can be compared with children, you just try to do everything possible so that these Gerans do not terrorize our country and people. It is terrible, what is happening now with these Gerans. They are simply perverts in this regard. They keep coming up with so many of those missiles, coming up with them, so that they fly better, to destroy us. It's absurd. But let's return to your question. Regarding the launches,

Speaker 1

we

Speaker 2

We call these seeded launches; this is, in fact, you have touched upon a very relevant topic, that when we began working in combat with crews, the Ministry of Defense allocated those crews with whom they considered it appropriate to carry out these applications. I will not say which specific crews these are, but we essentially began working very actively with three crews, and another two or three periodically.

Unknown speaker

And

Speaker 2

This, actually, is what we expected, but when you encounter it, it adds work. A month, what was happening a month ago, and what is happening now with the introduction of jet Shaheds, is a different picture. We were preparing the prototype for the picture that existed a month ago; as of today, we have a completely different application scenario. And one of the formats for countering these enemy changes is exactly what you are saying, the method of application, because a container launch, what does it provide? It provides speed of preparation and a faster launch, when you already have a fully loaded drone in place, and you press a button, and it is ready to fly out. This is about the speed of preparation. The second platform option is a mother-drone. We also sometimes call it a lift, in the sense that you can lift it. This also exists; you can reach a certain altitude with a larger battery capacity. And, accordingly, you can start from a height of 3-4, to which you can raise the mother-drone; from this height, you can launch. And, actually, a lot of the drone was changed specifically for this capability to fly from a mother-drone from a certain height, because you need to turn it on there, and you need to make sure that the drone does not freeze to the carrier on which you are carrying it.

Speaker 1

Of the trigger mechanism. Yes,

Speaker 2

because this is, actually, such a non-obvious topic, because at altitude the air is cold. And during the first few trial runs, no one expected this, but they just froze over, they were completely in ice, everything was in ice, and it froze. And these are the kinds of things where you think, we'll launch from the motherboard, but when you start working with something in a real, concrete way, you actually have so many challenges there that need to be overcome to do it.

Speaker 1

And what heights are we talking about?

Speaker 2

If we are talking about the mothership. Yes. Well, now we are working there at altitudes up to three or three kilometers; this is what can be done repeatedly. The altitude could be higher, but there is also the question of convenience, the question of the repeatability of this procedure, and some kind of expediency, so there. Therefore, this is also one of the large pieces of work, because a very large R&D resource is dedicated specifically to these robots with an alternative descent method, because there is also launch from a jet accelerator.

Speaker 1

I have a question written there regarding this as well.

Speaker 2

This is also an interesting topic, because it is necessary to understand that when you have a jet booster, you can accelerate it to 1,000 km per hour, it will heat up to 400 degrees and will start to decompose in the air. And there are also certain challenges there that one must fight and work on. And all of this requires engineering potential, R&D potential, to cope with all these challenges.

Speaker 1

Do I understand correctly that launching from another medium is already a process that exists?

Speaker 2

Yes, this is a process that exists, but it must be understood that as of today, we are testing specifically the prototype. Some prototypes are adapted for launch from a carrier, some prototypes are not adapted. The carrier itself is a problem that arose during combat testing, because it was like one of the hypotheses. Let's try it this way. Similarly, with carriers, a lot of work needs to be done to make it a working system. Although our task is to develop it to such a condition that you could use it classically from the ground, with a crew. Similarly, if you want to use it with a carrier, so that you wouldn't need to radically redesign it. Accordingly, there is a certain set of solutions that allowed them to use it specifically from a carrier. This is exactly the work that was carried out regarding the prototype so that it would be a more practical drone in application. And this was only possible to do in collaboration with combat pilots, with combat crews in combat operations.

Speaker 1

And the carrier? I don't know, there is probably no point in asking what kind of drone it is, because you are unlikely to say what the carrier is.

Speaker 2

Look, our task is not to be tied to the carrier, but simply to develop certain integration solutions for a carrier with which you can come, say, here is our drone, here is our integration system, attach it, ensure 1, 2, 3, and we can work with you. Our goal was to make it universal, not just tying it to one specific product. There are special technical solutions here that can make the carrier, essentially, a launch platform for this asset.

Speaker 1

So there are a number of potential carriers? Or have they only tested with one so far?

Speaker 2

Of course, there is a certain number of potential carriers and we have tested with various carriers. Therefore, here we can say that there is simply the possibility of launching a carrier; carriers need to be slightly adapted, and certain means attached that allow working with them.

Speaker 1

And what is its weight?

Speaker 2

This

Speaker 1

sample

Speaker 2

4 kg 600 g is the take-off weight with a 500 g warhead.

Speaker 1

And the prototype?

Speaker 2

The prototype is actually roughly the same, but here we actually optimized it, but at the same time the prototype does not have an automatic guidance system,

Unknown speaker

this

Speaker 1

set of boards.

Unknown speaker

And

Speaker 2

The prototype had 300 g of weight, here we can talk about weight up to 500 g. Therefore, we optimized the weight, but this weight was taken up by other systems. And in reality, we remained at the same weight, improved the technical specifications, but added functions, added range, added speed, and so on. In reality, as of now, we have finalized this final version, because we can certainly say that the fact that we are catching up to this jet target, a typical Shahed Rigaran 5, that we see the target, we can detect it, we can catch up to it, we can get close to it. There was also this science of how best to approach, because there is a jet stream there. There were successful attempts, there were unsuccessful attempts, when you seem to be closing in, but then the jet stream starts and you have to go around for another loop to catch up to it. But as of now, we actually have the ability to catch up. There are all the relevant videos where you can see how this happens. It is a quite interesting process, because the actual task is to detect, catch up, get close to the required distance, and detonate.

Speaker 1

And is the launch with a booster operational, or are there also some trial applications using this method?

Speaker 2

There are trial applications, it's in progress. The only question right now is about integrity. You need to clearly answer for yourself where you can apply this, why an accelerator will be

Speaker 1

more comfortable than tronlift

Speaker 2

or a nut. Because it can be convenient from some enclosed space, or where it is necessary to reach a height very quickly. But in reality, it is not always practical and convenient. Plus, with the accelerator, there is also a safety issue, because then an aluminum pipe falls with it. This is also a certain aspect. We hope that it falls in a field, but this is also a part that

Speaker 1

It needs to be decided.

Speaker 2

This also depends on the location. Accordingly, there are advantages because you reach a height very quickly, but there are also disadvantages. That,

Unknown speaker

what

Speaker 2

A pipe is falling from the sky.

Speaker 1

And temperature. And temperature,

Speaker 2

and acceleration. And actually, regarding what is connected with the accelerator, the main work we are doing with the accelerator is to make the jet accelerator burn slower. Because those accelerators we are testing now, you rev up very quickly, and very often it is very fast. And we are working on making it burn slower, more predictably. And it will be more convenient for us, and we can speak of some greater predictability in the plan. And actually, this drone, if we are talking about 1000 kilometers, it was not designed to fly 1000 kilometers, so this plastic, when it heats up, and at such a speed, it begins…

Speaker 1

Camera, systems, much more. Yes,

Speaker 2

To put it this way, at 1,000 kilometers, it has to be entirely aluminum or made of certain metals to withstand it, because the airflow also starts heating you up, and the resistance begins to grow in geometric progression. So it's a bit of an engineering challenge. But we flew with combat pilots and recorded that we are catching up to them, that we see them, close in, and can engage them. Accordingly, we have now summarized everything on this prototype, made changes, and adapted it. By the way, a very important part—this must be understood—is that there is the task of creating a prototype, accelerating it to a high speed, and another part is to bring it to mass

Speaker 1

production. Our favorite topic.

Speaker 2

This is such a favorite topic because it seems to me that there is always a conflict between R&D and production. R&D came up with it and says, "do it," while production says, "how? it's impossible to mass-produce this, it doesn't work this way." Accordingly, it was necessary to carry out the process of industrialization, which is when a prototype was taken and adapted for mass production, and certain solutions were introduced that weren't obvious at first, but it was more optimal that way.

Speaker 1

Can you give some kind of example of what it's about?

Speaker 2

For example, if you count, you can see a larger number of shingles here.

Speaker 1

Even visually, it is visible. Even

Speaker 2

Visually, you see, there are more of them here.

Speaker 1

Let me show you on camera. It will be visible on camera that there are really many different ones here

Speaker 2

places. There are more shingles there.

Speaker 1

A bit heavy.

Speaker 2

More parts. Speaking of this product, there are fewer separate parts here. They are easier to assemble. A lot of attention was paid to the speed of electronics assembly. Plus, regarding certain units, when you develop the first product, you develop it for a specific component. But when we say that we are operating on the logic that every component must have a substitute, then, accordingly, here you don't prepare these substitutes. But here, you realize that today I will install a certain component, but I must anticipate that if this component is unavailable, I must also be able to install this one, that one, or another one. And, accordingly, you adapt all parts of the drone so that you could install the first, second, or third option. This applies to the video transmitter, camera, battery. You incorporate this component variability everywhere and you incorporate the fact that you have to mass-produce it everywhere. It must be divided into blocks; it must be properly subject to the quality control process, because this is also an important topic, as you also have to control quality during production and you have to make it in such a way that this is possible to do.

Speaker 1

Provide for control. Yes, but,

Speaker 2

Actually, we have now carried out industrialization. This is already a production sample; we can manufacture it in mass. For this, there is the labor potential, there is the production potential in the production facilities. That is, we can say that we can produce this product in the thousands, on a mass scale. And this is the stage where it has, in essence, passed the check by combat pilots. And we have taken their feedback into account. In fact, we are still taking it into account now. We receive some feedback and, most likely, this is the part of the work that production doesn't like very much, because they want everything to be predictable and repeatable. But we must understand that if the enemy changes their sword, we must change our shield. Therefore, we have taken into account the feedback here, the critical and main points. But I do not rule out that there will be further changes based on what happens on the battlefield with these jet Shaheds; accordingly, we will implement the appropriate changes.

Speaker 1

I also want to ask you about the feedback from the military. You delivered the first samples there, and what was the first feedback you received? Like, "it's interesting, we can try to do something further," or "take it back, this doesn't work at all." What was the range of that feedback?

Speaker 2

Well, actually, we were primarily surprised by the fact that the military personnel we visited flew on the first day after a brief test flight briefing during the day, which we didn't expect, to be honest, because the controls are different and the speeds are different. But, in fact, the videos we are about to show were flown by the military. And for us, this was also a surprise, because they figured it out and flew. I think this is actually one of the strengths of this type of interceptor—that we have quite a few crews who are used to this, and they adapt to it very quickly.

Unknown speaker

Actually,

Speaker 2

The feedback we received from the military was varied, but they were very interested. First of all, because they aren't often brought equipment that stably flies over 400-450 km per hour, and that was also interesting to them. And they approached it with interest; there was no condescension or unwillingness to help. They got involved, telling us what to change, what to improve, and where we should rework something. Usually, this feedback was constructive, and it wasn't as if there was something like "we don't like this at all," "we don't want it this way," "change this if." That didn't happen; there were some things like "we recommend you do it a bit like this here, because then we will have better starting conditions, we will see ourselves better on the radar." That is, one must understand that there is also a beacon system here, because we very often work in conditions of jammed GPS and we use radio beacons to determine our position in space via triangulation in the absence of GPS. And this is also a separate engineering challenge, because it's necessary to organize the beacon system, everything needs to be configured correctly, because we are now looking at drones, and drones are like arrows,

Speaker 1

and

Speaker 2

There is also the bow from which you launch this arrow. Accordingly, this bow is the ground control station. A lot of work was done specifically on the ground control stations with these radar integrations, beacon integrations, and these various automatic things – this was a very large piece of work, also carried out in parallel on this ground control station, to make it possible to use. And, accordingly, when we talk about feedback, feedback is not only about some design changes to the drone, feedback is also about this integration, feedback could also be about the antenna, or the convenience of packaging. In reality, there is still a lot more around the drone that needed to be looked at, felt, used, to understand that, okay, the drone suits us, but the antenna is inconvenient to connect, so please redesign this for us. And when we talk about feedback, it's not only about the drone, it's feedback about the whole system in general, its convenience, its integrations. And this is, in reality, such a very important piece of work that was done. And we are very grateful to everyone involved, all the military personnel who were involved in this process, because I believe that we did very good work with them, they got involved, they helped. And we are indeed grateful to both the military and the military-political leadership because it was felt that they needed this, they pushed it forward, they always provided the necessary contacts, connected people, whether one likes it or not. There was always such a process where everyone was interested in this, everyone understands that it is necessary to get up, act, go, run, and develop this, because the challenges are very serious.

Speaker 1

And the ground station—do you already have a ready ground station for the Strile interceptors? Is it the same, how does it differ, or is it not the same? What has been adapted, the software, and overall, what does the complex look like that the military receives?

Speaker 2

Actually, this is a very similar ground station, it differs in its software. Here, besides our software, there is also software from our partners at Quantum Systems,

Unknown speaker

this

Speaker 1

system

Speaker 2

Mosaicta. It is a system that allows for remote control. It is a broader, more comprehensive system, but if we speak about our part now, it is a certain piece of software that slightly optimizes the control process, adds the possibility of some intelligent functions, and remote control via the internet, because it is important to understand now that we have very effective, fantastically effective crews. There are moderately effective crews, there are people who have just arrived and are beginning to build up their experience, and now there are fewer ordinary Shaheds, and people who have just come to these interceptor drones no longer have such a field for gaining experience as those who are now super experienced had a year ago, because 500-600 Shaheds were released against us per night; just imagine what a school that was. And these fantastically effective crews that have been produced, it is logical to employ them over as many areas as possible; accordingly, for this, remote control is needed, so that these fantastically effective crews could control drones somewhere in the Kyiv region, and in the Chernihiv region, and in the Sumy region, and in any other areas where the internet allows and this infrastructure and remote control exist. This actually also seems to me like a very correct step in how this is organized for us; I think they did well. The way it is developed is very good and well thought out.

Speaker 1

And what does the complex look like, what do the military receive when they receive the system? Again, because it's not just about the drone; it's about many things.

Speaker 2

Usually, if we are talking about the complex, it is a ground control station and 100 units. We also count the units as the warhead, because the warhead is supplied separately—this is the warhead itself and the detonator. And all of this is in secure, organized packaging, because, first and foremost, it is for the safety of the crew and so that nothing explodes. Safety is indeed a very important aspect. The ground control station also includes an antenna with a rotation mechanism. This is when the system understands via the Radium HQ system and rotates the antenna in that direction so that you always have a stable signal, because during our tests, we flew up to 30 km from the ground control station. And this actually requires the antenna to be a bit smarter and track the drone. And it is organized such that the antenna tracks and rotates in the direction of the drone so that you always have the most stable and powerful connection. Also, everything is packed accordingly so that it reaches the final recipient as intact as possible. Finally, there are the documents.

Speaker 1

And the zip?

Speaker 2

Of course, these are already some kind of standard parts. You can't say that there is much here that needs to be unscrewed and screwed back in. If we are talking about spare parts, it is more about how to charge it, how to flash it. Because we are talking about a tool that can be updated via software. If we supply it today without a certain function, and if this function appears in three months, we can install it on this drone, since there is a computer here and any software that you can add to a new drone, you can accordingly add to an old one. We are considering one such possibility—interception with roughness patterns—but right now I don't want to be too optimistic, because it is indeed a difficult task and I don't want to promise something that won't be delivered, because it will be hard to achieve.

Speaker 1

Of those first drones you provided to the military, were there interceptions immediately?

Speaker 2

In reality, those flights we had with visual contacts and detonations happened a month ago with our crews; combat pilots flew, but our crews were present. Yes, there were close encounters and detonations, but there is a separate part regarding the ability to catch up with us, and there is also a part related to the warhead, and accordingly, whether it is enough when you have already caught up, closed in, leveled out, and detonate—whether this is sufficient. And how do you need this explosive part to rupture? This is also part of the issue, which is why we adopted the path of standardized factory-made warheads, so that we would also have predictability in this area, because we were working on the part to stably catch up, but the warhead was left to the pilots. Now we are talking about a factory warhead designed for us, and we can also work with it and improve it in some way.

Speaker 1

And what are its parameters, meaning what is it, the striking elements, what does it look like?

Speaker 2

Actually, as for what the military did, she can from launch to launch, she

Speaker 1

could

Speaker 2

look different, depending on the decision the military made together with the sapper. But we use a high-explosive warhead to inflict as much damage as possible; our task is to change the geometry, to damage it, and ideally to do everything possible so that the warhead of the Shahed itself detonates. But at the very least, if we damage the hull's geometry at such speeds, it will start to lose speed and fall. As for these strike elements themselves, actually, the structure as it is—you can make holes in it, but it will continue to fly with those holes, because we have seen some analytical notes from the Ministry of Defense where they showed that Shaheds can be almost torn apart with huge holes, yet they continue to fly and move forward. Therefore, our task is to ruin the geometry so that it loses speed, or better yet, detonates.

Speaker 1

At the TSU Demo Day, you also showed a hand-launch. At what stage is this idea? Are you continuing to develop it?

Speaker 2

Yes, we are continuing development. It's actually an interesting direction. Currently, the R&D task was simply to finalize this process, but in parallel, development was also underway for that hand launch you are talking about. We call it "Hand Launch". Essentially, for us, it's a "Hand Launch" spear. I can also show a video. We now have to optimize and compress it because, essentially, we have been using similar drones for ourselves, but it's actually too much in terms of the fact that it can fly 45 kilometers.

Speaker 1

And this is not needed. And you have

Speaker 2

In manual launch, the filter is your eye. If you see the target with your eye, then you can employ it. But if your eye sees 2-3 kilometers, you don't need a range of 45. This is just extra weight, extra parameters, and a corresponding extra price for this capability to fly 45 kilometers. Therefore, this project is developing. I think that in some time we will already show the first prototypes, samples, and also put them on combat duty. There are questions regarding the warhead.

Speaker 1

Because this will also be security. Many tasks, but this is what people hold in their hands.

Speaker 2

Yes, yes, yes. Because there is the question of who the user of these things is.

Speaker 1

This

Speaker 2

military formation. And if it is a military formation and there are warheads there, will only sappers then use this tool. There are some, so to speak, legal security issues that we have to resolve in order to understand who our operator is, what status they must have, so that this operator has all the legal grounds to use them. And this product was sufficient to perform the tasks set for it. But now we are developing it, and we are developing it based on this UAV. Perhaps some software updates will appear for it, which will allow using this according to similar scenarios, with this drone that has hand-launch.

Speaker 1

One more question. I noticed—I don't know how much of a trend this is—that even today during the recording they shot down a Geran 5, and that Geran 5s are shot down more often than Geran 4s. Why is that? Is there some peculiarity to this? Maybe the targets themselves are different?

Speaker 2

To be honest, it currently looks like we are primarily looking at those targets that were flying toward Kyiv. Geran 5 is very often sent toward Kyiv. And the Geran 4s that we had, if I'm not mistaken, were shot down in the Odesa direction.

Speaker 1

In that video you provided, several Geran 5s and one Geran 4? Yes, Geran

Speaker 2

4. We had some kind of practice like that. Perhaps it was flying slower or was not flying where we were. Usually, Geran 5s fly toward Kyiv and we try to work. Honestly, I don't have an answer

Speaker 1

to this. I understand that this is most likely military air targets, because they see more statistics and understand what is flying where.

Speaker 2

Perhaps crews of ordinary interceptors engage these targets first, because the speed of the Geran-4 is such that it can fly at 280-300, and 280-300 is…

Speaker 1

already these speeds. And then accelerate? 280

Speaker 2

-300 are the speeds that allow even ordinary interceptors

Speaker 1

work. Or other interception means should work. In general, if you look at the reports from companies that manufacture other interception means, it looks like there are more videos of Geran-5s. But, again, not everything is published, not everyone shares everything. Perhaps this is a mistaken observation, but for some reason, a colleague and I were discussing this even today, that this is the case. Tell us about the Strila interceptors, what is their fate? Given that the Russians have started using more jet-powered Shaheds, to what extent are interceptors such as the Strila currently being used, how actively, and what is happening with them?

Speaker 2

Actually, overall, it should be understood that the interceptor class is, so to speak, for slow targets, 150-200 km per hour. It will remain relevant until the end of the war, because…

Speaker 1

And reconnaissance drones, ICE Shaheds… Reconnaissance drones,

Speaker 2

Lancets, ICE Shaheds, Talmas, Gerans, very many targets.

Speaker 1

Gerberas.

Speaker 2

Gerbers, yes. It won't end. They will start making scouts cheaper, and there will be more of them. The same Lancets. We cannot say that it's over, we are stopping shooting down Shaheds, and we won't be shooting down Lancets. Everything that is in the sky must be shot down. Accordingly, they continue to supply. We have introduced an update, now it is the Strila 2 LR, and we have almost doubled the range, because right now it looks like the Strila didn't have the speed to catch up with a jet-powered Shahed. It did, but this is only the fourth. But for an ordinary Shahed, such speed is not needed; it is better to have more range. Accordingly, we increased the range, adding almost 10 minutes to its endurance. Accordingly, the plan for intercepting ordinary Shaheds and targets on the front has become more practical. Therefore, it continues to be supplied, but the assortment of targets is simply increasing; the Russians are dreaming up various interceptors, various middle-strikes, like this cheap drone

Speaker 1

What is it called?

Speaker 2

Molnya. Molnya, yes. You can't say either that it's a Molnya, it's cheap, we won't shoot it down, let it fly with 7 kg to Vykhivky or somewhere, you shoot everything down, it's important for you that nothing hits, because you don't know where that Molnya is flying.

Speaker 1

So these are the steels and products that you supply, that are in use? Yes, those that are in use.

Speaker 2

And actually, regardless of what changes for us going forward, this will be relevant for all manufacturers; these products will not cease to be relevant, because as long as something is flying in the sky, they will be relevant. It is a separate story that counter-guidance and this whole situation—as soon as we begin to systematically achieve hits on an intercept course, most likely, we will move toward starting to fight FPV drones. And I think this will happen after some period of time—I don't know, in six months, in a year—and there will already be a discussion about how we should shoot down ordinary FPV drones, because right now we shoot them down with a pump-action shotgun, but there too, I think there will be a war with these FPV drones,

Speaker 1

how

Speaker 2

as soon as cheap methods of automatic guidance to such small objects appear.

Speaker 1

I started with the fact that I got to know you at West Braivan with small bombers; you also have a line of copters, how is it developing? On the website it is presented in the same way, I looked through it, there is Kruk, Krukmini, there is Simka, well, that's an FPV drone, as far as I understand, and there are multi-systems in general, well, copters in the sense of a platform that can be a carrier for various means, how is this line developing?

Speaker 2

Actually, we are now paying more attention specifically to interceptors, and we also have the Kruk scout; this is also a relevant point given that there is currently a tendency to move away from Chinese [technology] in Europe,

Speaker 1

in Ukraine. In other words, Kruk is a Ukrainian Mavic, let's say, it is in this class.

Speaker 2

Yes, but right now such application in our case looks like it is mainly used as a relay carrier, and the use cases we currently have simply differ from what it was planned for. But still, one way or another, now the focus of attention

Speaker 1

exactly on

Speaker 2

ensuring airspace security, specifically with interceptors, so it is indeed such a complex engineering task, many challenges. Here, by the way, one immediately wants to mention that if there are engineers who are interested in tackling this, we invite you, because these speeds are already truly an engineering, partly a physical, partly a mathematical task, as is the guidance and specifically the aerodynamics. If there are engineers who are interested in working on this, we have a website with vacancies, we are actively

Speaker 1

We are looking for and attracting people. We will add a video, a link to the website so they don't have to search. Yes, send it.

Speaker 2

You understand, we will be very glad, because this is indeed such an engineering task. Engineers are needed; there is a constant shortage of qualified personnel in terms of engineering, mathematics, physics, programming—it is all relevant.

Speaker 1

To conclude, I want to ask, because I heard that you were involved with FPV drones even before the start of the full-scale invasion. Tell me, how was it? Were you into racing drones?

Speaker 2

Yes, it was essentially model aircraft sport plus FPV drone frames, but before the start of the war, it was just a hobby. It wasn't that popular worldwide, but it was starting to gain popularity; actually, if you remember, someone was already launching the first drones even before the start of the full-scale invasion. I remember there was a video where one flew into a dugout. And honestly, for us at the time, it was a mystery why it wasn't being used, because we saw a truly massive potential for the military, but there was no understanding of why it wasn't being utilized. Because it is essentially a guided munition that you can direct wherever you need. But yes, that was the story, we really did develop frames, manufactured frames for FPV drones.

Speaker 1

And how did this help grow the company later? Did this core of people who had already worked with this help?

Speaker 2

A group of people, understanding, some engineering potential, a production base, albeit small, but a basis of understanding of how to work with metals, with materials, how to design it. We, in essence, relied on this experience, on these skills, and began this work.

Speaker 1

Thank you very much for the conversation; I feel that it turned out to be thorough, interesting, and comprehensive. Once again, I remind you that in the description under the video, there are links to vacancies at the companies V-Industries and Quantum V-Industries. Thank you for coming, thank you for bringing the drones. I hope that by the time we prepare this video for editing, there will be a pile of shot-down Geraniums of various types.

Speaker 2

Thank you very much.

Unknown speaker

Thank you.

Speaker 1

Thank you.

Speaker 2

Thank you.

Unknown speaker

Thank you.


Don't forget to donate, Ukraine's cause is ours! Support Ukraine!

Originaltitel: «Ціль має розвалитися в повітрі» - дрон SPYS проти реактивних цілей!

Längd: 1:05:12

Scroll to Top